| Original scientific papers |
|
|
|
| M. Górny, R. Dańko, M. Holtzer – The effects of the metal temperature and wall thickness on flake graphite layer in ductile iron (pp.11-14) |
PDF 326 KB |
|
|
| J. Zych, J. Kolczyk, Ł. Jamrozowicz – The influence of the shape of wax pattern on the kinetics of drying of ceramic moulds (pp.15-18) |
PDF 270 KB |
|
|
| A. Vaško, L. Trško, R. Konečná – Fatigue behaviour of synthetic nodular cast irons (pp.19-22) |
PDF 391 KB |
|
|
| Ł. Jamrozowicz, J. Zych, J. Kolczyk – The drying kinetics of protective coatings used on sand molds (pp.23-26) |
PDF 351 KB |
|
|
| M. Saternus, T. Merder – A Flow rate of gas versus the level of gas dispersion in physical model of continuous refining reactor (pp.27-30) |
PDF 408 KB |
|
|
| A. Štrkalj, Z. Glavaš, G. Matijašić – Removal of Ni (II) and Cr (VI) ions from aqueous solution using by-product from the production of aluminium (pp.31-34) |
PDF 215 KB |
|
|
| S. Rzadkosz, J. Zych, M. Piękoś, J. Kozana, A. Garbacz-Klempka, J. Kolczyk, Ł. Jamrozowicz – Influence of refining treatments on the properties of Al-Si alloys (pp.35-38) |
PDF 238 KB |
|
|
| L. Hurtalová, E. Tillová, M. Chalupová – Possibilities of Fe-RICH phases elimination with using heat treatment in secondary Al-Si-Cu cast alloy (pp.39-42) |
PDF 368 KB |
|
|
| N. Luptáková, F. Pešlová, J. Kliber – The study and microstructure analysis of zinc and zinc oxide (pp.43-46) |
PDF 489 KB |
|
|
| D. Zasada, R. Jasionowski, J. Sienkiewicz – Grain size influences the corrosion and cavitation of Ni3Al intermetallic alloys (pp.47-50) |
PDF 535 KB |
|
|
| G. Brovč, G. Dražič, B. Karpe, I. Djordjević, G. Lojen, B. Kosec, M. Bizjak –Synthesis and characterization of hardened Cu-Fe-Ni-P alloy (pp.51-54) |
PDF 454 KB |
|
|
| M. Burzić, M. Manjgo, J. Bernetič, Z. Burzić, M. Arsić – Effect of variable load on crack initiation microalloyed steel S 690-QL (pp.55-58) |
PDF 174 KB |
|
|
| J. Belan – High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation (pp.59-62) |
PDF 501 KB |
|
|
| J. Przondziono, W. Walke – Electrochemical characterisation of X10CrNi 18-8 steel in artificial plasma (pp.63-66) |
PDF 116 KB |
|
|
| J. Tušek, A. Skumavc, D. Klobčar – Vacuum brazing of tools with a thin foil (pp.67-70) |
PDF 245 KB |
|
|
| J. Matusiak, J. Wyciślik – Influence of shielding gas on fume and gas emission during ARC weld brazing of steel sheets with coatings (pp.71-74) |
PDF 260 KB |
|
|
| S. A. Aksenov, E. N. Chumachenko, I. V. Logashina, T. Kubina – Numerical simulation in roll pass design for bar rolling (pp.75-78) |
PDF 277 KB |
|
|
| A. Kawałek, H. Dyja, A. M. Galkin, K. V. Ozhmegov, M. Knapiński – Physical modelling of the plastic working processes of modified Zr-Nb zirconium alloy bars and tubes (pp.79-82) |
PDF 313 KB |
|
|
| J. Boryca, T. Wyleciał, D. Urbaniak – The effect of condition of the charge surface on the scale adhesion for excess air combustion (pp.83-86) |
PDF 194 KB |
|
|
| G. Krolczyk, P. Nieslony, S. Legutko, I. Samardzic – Investigation of the physical parameters of duplex stainless steel (DSS) surface integrity after turning (pp.87-90) |
PDF 290 KB |
|
|
| G. Krolczyk, P. Nieslony, S. Legutko, S. Hloch, I. Samardzic – Investigation of selected surface integrity features of duplex stainless steel (DSS) after turning (pp.91-94) |
PDF 250 KB |
|
|
Preliminary notes
|
|
|
|
| B. Oleksiak, M. Kozioł, J. Wieczorek, M. Krupa, P. Folęga – Strength of briquettes made of Cu concentrate and carbon-bearing materials (pp.95-97) |
PDF 186 KB |
|
|
| A. Smoliński, D. Burchart-Korol, J. Korol – Chemometric study of the sinter mixtures used in sinter plants in Poland (pp.98-100) |
PDF 161 KB |
|
|
| P. Bigoš, J. Kuľka, M. Mantič, M. Kopas – Comparison of local stress values obtained by two measuring methods on blast furnace shell (pp.101-104) |
PDF 306 KB |
|
|
| P. Kuryło, P. Frankovský, E. Tertel, J. Janek – The use of mathematical model of hardness spread in the research on the property of cast-iron molds (pp.105-108) |
PDF 238 KB |
|
|
| M. Łucarz – Thermal reclamation of the used moulding sands (pp.109-112) |
PDF 804 KB |
|
|
| G. Siwiec, M. Sozańska, L. Blacha, A. Smalcerz – Behaviour of iron during reduction of slag obtained from copper flash smelting (pp.113-115) |
PDF 197 KB |
|
|
| B. Oleksiak, J. Lipart, A. Karbownik, R. Burdzik – Effects of a reducer type on copper flash smelting slag decopperisation (pp.116-118) |
PDF 223 KB |
|
|
| D. Novoselović, I. Budić, I. Samardžić – Residual stresses in castings produced by press die casting technology (pp.119-122) |
PDF 350 KB |
|
|
| T. Merder, J. Pieprzyca, M. Warzecha, P. Warzecha – Flow and mixing of liquid steel in multi-strand tundish delta type – physical modelling (pp.123-126) |
PDF 458 KB |
|
|
| J. Pieprzyca, T. Merder, M. Warzecha, J. Skorupa – The influence of steel preheating level in the tundish on the primary structure of a continuously cast ingot (pp.127-130) |
PDF 328 KB |
|
|
| J. Piątkowski, R. Wieszała – Microstructure of AlSi17Cu5 alloy after overheating over liquidus temperature (pp.131-134) |
PDF 515 KB |
|
|
| J. Kasińska – Wide – ranging influence of mischmetal on properties of G17CrMo5-5 cast steel (pp.135-138) |
PDF 850 KB |
|
|
| D. Kalisz, P. L. Żak, J. Lelito, M. Szucki, J. S. Suchy, B. Gracz – Modeling of MnS precipitation during the crystallization of grain oriented silicon steel (pp.139-142) |
PDF 249 KB |
|
|
| J. Mikuła, M. Łach, J. S. Kowalski – Copper matrix composites reinforced with volcanic tuff (pp.143-146) |
PDF 414 KB |
|
|
| M. Ogórek, S. Skuza, T. Frączek – The efficiency of ion nitriding of austenitic stainless steel 304 using the “active screen” (pp.147-150) |
PDF 177 KB |
|
|
| T. Rzychoń, T. Matuła, B. Chmiela, J. Łabaj, K. Rogóż – Modifications of the chemical composition and microstructure of flash smelting copper slags in the process of their reduction (pp.151-153) |
PDF 274 KB |
|
|
| J. Cebulski – Application of feal intermetallic phase matrix based alloys in the turbine components of a turbocharger (pp.154-156) |
PDF 385 KB |
|
|
| A. Mekhtiev, Ye. Shabanov, A. Issagulov, S. Baissanov, A. Baissanov, D. Issagulova – Development of technology of complex aluminum-silicon-chrome alloy with utilization of off grade raw materials (pp.157-160) |
PDF 156 KB |
|
|
| M. Suliga, R. Kruzel, T. Garstka, J. Gazdowicz – The influence of drawing speed on structure changes in high carbon steel wires (pp.161-164) |
PDF 421 KB |
|
|
| M. Knapinski, A. Kawalek, B. Koczurkiewicz, T. Garstka – The influence of chemical composition on structure of plate X100 after physical simulations of finishing rolling process with accelerated cooling (pp.165-168) |
PDF 493 KB |
|
|
| L’. Miková, S. Medvecká – Beňová, M. Kelemen, F. Trebuňa, I. Virgala – Application of shape memory alloy (SMA) as actuator (pp.169-172) |
PDF 372 KB |
|
|
| M. Kelemen, I. Virgala, E. Prada, T. Lipták – Experimental verification of the shape memory alloy (SMA) spring actuator for application on in-pipe machine (pp.173-176) |
PDF 229 KB |
|
|
| Z. Pater, A. Tofil, J. Tomczak, T. Bulzak – Numerical analysis of the cross wedge rolling process (CWR) for a stepped shaft (pp.177-180) |
PDF 224 KB |
|
|
| P. Lacková, M. Buršák, T. Kvačkaj, M. Halama – Mechanical and corrosion properties of aluminium alloy EN AW 6082 after severe plastic deformation (SPD) (pp.181-183) |
PDF 236 KB |
|
|
| S. Wiewiórowska, Z. Muskalski – The influnece of the partial single reduction on mechanical properties wires made from trip steel with 0,43 % C (pp.184-186) |
PDF 282 KB |
|
|
| P. Jonšta, I. Vlčková, L’. Krišták, I. Špička, Z. Jonšta – Contribution to the thermal properties of selected steels (pp.187-190) |
PDF 156 KB |
|
|
| M. Orečný, M. Buršák, J. Viňáš – The influence of heat treatnemnt on the abrasive wear resistnace of a construction and a tool steel (pp.191-193) |
PDF 410 KB |
|
|
| S. Medvecká – Beňová, L’. Miková, P. Kaššay – Material properties of rubber-cord flexible element of pneumatic flexible coupling (pp.194-196) |
PDF 177 KB |
|
|
| P. Sivák, I. Delyová, F. Trebuňa – Verification of the material properties of the structure elements of compressor station for the needs of their redesign (pp.197-200) |
PDF 562 KB |
|
|
| D. Urbaniak, C. Kolmasiak, T. Wyleciał – Using of fluidized-bed jet mill to a super fine comminution of steel composite (pp.201-203) |
PDF 148 KB |
|
|
| J. Lelito, P. L. Żak, B. Gracz, M. Szucki, D. Kalisz, P. Malinowski, J. S. Suchy, W. K. Krajewski – Determination of substrate log-normal distribution in the AZ91/SICP composite (pp.204-206) |
PDF 238 KB |
|
|
| M. Maj, A. Klasik, K. Pietrzak, D. Rudnik – Modified low-cycle fatigue (LCF) test (pp.207-210) |
PDF 240 KB |
|
|
| M. Mihaliková, M. Német, V. Girman – DP 600 steel research of dynamic testing (pp.211-213) |
PDF 348 KB |
|
|
| R. Kruzel, M. Suliga – The impact of the steel cord construction on its decline of breaking force after fatigue test in bidirectional bending conditions (pp.214-216) |
PDF 262 KB |
|
|
| A. Garbacz-Klempka, S. Rzadkosz, R. Klempka, W. Ossowski – Metallographic and corrosion research of copper from archaeological sites (pp.217-220) |
PDF 417 KB |
|
|
| L’. Miková, M. Kelemen, F. Trebuňa, I. Virgala, S. Medvecká-Beňová – Experimental identification of piezo actuator characteristic (pp.221-223) |
PDF 269 KB |
|
|
| S. Medvecká – Beňová, I. Virgala, M. Kelemen, L’. Miková – Influence of material and gear parameters on the safety of gearing in metallurgical industry (pp.224-226) |
PDF 252 KB |
|
|
| D. Malindžák, J. Šaderová, D. Vitko, M. Malindžáková, A. Gazda – The methodology and model for in-process inventories calculation in the conditions of metallurgy production (pp.227-230) |
PDF 196 KB |
|
|
| T. Galeta, G. Šimunović, M. Mazurek – Impact of strengthening fluids on roughness of 3D printed models (pp.231-234) |
PDF 397 KB |
|
|
| W. Matysiak, L. Bernat – Shaping the edges using flowdrill technology (pp.235-238) |
PDF 253 KB |
|
|
| M. Hadžistević, B. Štrbac, V. Spasić Jokić, M. Delić, M. Sekulić, J. Hodolič – Factors of estimating flatness error as a surface requirement of exploitation (pp.239-242) |
PDF 267 KB |
|
|
| A. Samolejová, P. Wicher, M. Lampa, R. Lenort, J. Kutáč, A. Sikorová – Factors of human resource planning in metallurgical company (pp.243-246) |
PDF 191 KB |
|
|
| M. Malindžáková, A. Rosová, V. Baranová, J. Futó – Modelling of outbursts and ejections occurrences during steel production (pp.247-250) |
PDF 392 KB |
|
|
| V. Chirila, C. Chirila – Stock return, seasonality and asymmetric conditional volatility in steel & iron subsector (pp.251-253) |
PDF 128 KB |
|
|
Review papers
|
|
|
|
| J. Willner, J. Kadukova, A. Fornalczyk, M. Saternus – Biohydrometallurgical methods for metals recovery from waste materials (pp.255-258) |
PDF 193 KB |
| S. Rzadkosz, M. Kranc, A. Garbacz-Klempka, J. Kozana, M. Piękoś – Refining processes in the copper casting technology (pp.259-262) |
PDF 129 KB |
| S. Kluska-Nawarecka, E. Nawarecki, B. Śnieżyński, D. Wilk-Kołodziejczyk – The recommendation system knowledge representation and reasoning procedures under uncertainty for metal casting (pp.263-266) |
PDF 264 KB |
| K. Janovská, R. Lenort, A. Samolejová, Š. Vilamová, D. Stoch – Analysis of ecological intensity of metallurgical production (pp.267-269) |
PDF 111 KB |
| W. Stanek, L. Blacha, M. Szega – Thermo-ecological cost (TEC) evaluation of metallurgical processes (pp.270-272) |
PDF 191 KB |
| I. Jonek-Kowalska – Risk, profitability and value of the leading steel producers on the world capital markets (pp.273-275) |
PDF 131 KB |
| D. Burchart-Korol, M. Kruczek – Water scarcity assessment of steel production in national integrated steelmaking route (pp.276-278) |
PDF 101 KB |
| M. Kramarz, W. Kramarz – The identification of zones of amplification of disruptions in network supply chains of metallurgic products (pp.279-282) |
PDF 120 KB |
| T. Lis, K. Nowacki, M. Żelichowska, H. Kania – Innovation in metallurgical waste management (pp.283-285) |
PDF 132 KB |
| V. A. Popescu, Gh. N. Popescu, C. R. Popescu – The relation productivity – environment in the context of sustainable development – case study on the Romanian industry (pp.286-288) |
PDF 106 KB |
| V. A. Popescu, Gh. N. Popescu, C. R. Popescu – The impact of global crisis on the dominant sectors of the economy at the Romanian industry (pp.289-291) |
PDF 71 KB |
|
|
Professional papers
|
|
|
|
| S. Rzadkosz, J. Zych, A. Garbacz-Klempka, M. Kranc, J. Kozana, M. Piękoś, J. Kolczyk, Ł. Jamrozowicz, T. Stolarczyk – Copper alloys in investment casting technology (pp.293-296) |
PDF 260 KB |
|
|
| R. G. Popa, L. G. Popescu, T. A. Abagiu, C. Popescu, R. Cazalbasu – Aspects regarding the use of the industrial wastes as raw materials for the manufacture of building materials (pp.297-300) |
PDF 138 KB |
|
|
| K. Nowacki – Research perspectives in the field of acoustic treatment of liquid alloys of iron (pp.301-303) |
PDF 186 KB |
|
|
| J. Zuzik, R. Weiss, E. Weiss, L. Mixtaj, A. Kiraly – Return on shares of steel companies under the influence of mergers and acquisitions (pp.304-306) |
PDF 185 KB |
|
|
| Other |
|
|
|
| Ilija Mamuzić – 12th International Symposium of Croatian Metallurgical Society, June 19-23, 2016 – FIRST CIRCULAR – CALL FOR PAPERS (pp.5-7) |
PDF 113 KB |
|
|
| Election assambly of Croatian Metallurgical Society (pp.8-8) |
PDF 138 KB |
|
|
| Ilija Mamuzić – Minutes of the Meeting of the Editorial Board of the Journal Metalurgija, June 23, 2014 (pp.9-10) |
PDF 167 KB |
|
|
| Ilija Mamuzić – Survey of 11th International Symposium of Croatian Metallurgical Society, SHMD ‘2014 (pp.307-308) |
PDF 157 KB |
|
|
| Ilija Mamuzić – Acknowledgement to Reviewers 53 (2014) 1-4 (pp.254) |
PDF 67 KB |
