| Original scientific papers |
|
|
|
| S. Geng, H. Zhang, W. Ding, Y. Yu – Kinetics of pellet reduced by H2 and the mixture of CO and H2 (pp. 219-222) |
PDF 382 KB |
|
|
| L. H. Feng, X. B. Kang, H. K. Liang, G. L. Liu, C. Sun – Simulation study on the jet characteristics of coherent jet oxygen lance used in basic oxygen furnace (BOF) (pp. 223-225) |
PDF 116 KB |
|
|
| K. Nowacki, T. Lis – Qualitative characteristics of foundry dusts (pp. 226-230) |
PDF 133 KB |
|
|
| J. Li, C. F. Zhang, R. M. Yin, W. H. Zhang – Monte carlo simulation of anisotropic growth of grains during liquid phase sintering for ceramics (pp. 231-234) |
PDF 337 KB |
|
|
| L. H. Feng, M. Y. Zhu, X. B. Kang, L. Luo – Simulation study on the solute elements micro-segregation at solid-liquid interface of continuous casting steel slab (pp. 235-238) |
PDF 195 KB |
|
|
| G. Q. Liu, K. Liu, Y. K. Gao, G. Chen – Co-pyrolysis kinetics analysis of stone coal and biomass for vanadium extraction (pp. 239-241) |
PDF 97 KB |
|
|
| M. Dunđer, I. Samardžić, A. Ćorić, G. Salopek – Effects of real welding parameters of high-strength S1100QL steel on hardness and impact energy properties (pp. 242-244) |
PDF 264 KB |
|
|
| D. Y. Tian, X. D. Shu, C. Xu – Mechanism research on eliminating voids in bearing steel ball by floating-pressure method (FPM) (pp. 245-248) |
PDF 281 KB |
|
|
| C. Y. Shi, J. C. He – Analysis of influencing factors of the blocking layer based on electromagnetic induction-controlled automated steel-teeming system (pp. 249-252) |
PDF 194 KB |
|
|
| S. V. Konovalov, D. V. Zagulyaev, Y. F. Ivanov, V. E. Gromov – Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers (pp. 253-256) |
PDF 367 KB |
|
|
| Z. Y. Xu, J. N. Huang, B. W. Li, Z. W. Zhao – Investigation on removal of Nb from Nb-bearing hot metal with CO2 (pp. 257-260) |
PDF 158 KB |
|
|
| X. Y. Zhou, Y. Y. Wang, H. Jin, Z. P. Liang, X. L. Liu – Effect of ultrasound on Ni-Co/ZrO2 composite electrodeposition and corrosion resistance study of coatings (pp. 261-264) |
PDF 176 KB |
|
|
| J. Li, C. F. Zhang, R. M. Yin, W. H. Zhang – Prediction of mechanical properties of β-SiAlON ceramics based on BP neural network (pp. 265-268) |
PDF 340 KB |
|
|
| H. Jin, L. J. Chen, X. Y. Zhou, Y. Y. Wang – Effect of ultrasonic power on corrosion resistance and hardness of Ni-Co- Al2O3nanocomposite coatings (pp. 269-271) |
PDF 161 KB |
|
|
| A. Di Schino, R. Rufini – Thermo-mechanical process parameters effect on a 9 % Cr-2 % W steel (pp. 272-274) |
PDF 216 KB |
|
|
| S. Barannikova, Yu. Li, L. Zuev – Research of the plastic deformation localization of bimetal (pp. 275-278) |
PDF 200 KB |
|
|
| B. Karpe, S. Novak, A. Nagode, S. Kožuh, A. Pavlič, S. Rečnik, B. Kosec – Industrial control measurements of high chromium steel rolls heat treatment (pp. 279-282) |
PDF 248 KB |
|
|
| B. S. Sun, C. W. Wang, Z. L. Zhao – Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring (pp. 283-286) |
PDF 198 KB |
|
|
| S. A. A. Sajadi, A. Nazari Alavi, M. Mirzai – Investigation of thermal behavior of α-PbO and β-PbO in O2 atmosphere (pp. 287-290) |
PDF 201 KB |
|
|
| J. D. Huang, J. Li, L. X. Li – Fuzzy grey relational analysis for influence factors on the quality of calcined petroleum coke (pp. 291-294) |
PDF 311 KB |
|
|
| P. T. Iswanto, H. Akhyar, F. F. Utomo – Effect of shot peening at different almen intensities on fatigue behavior of AISI 304 (pp. 295-298) |
PDF 259 KB |
|
|
| D. A. Romanov, S. V. Moskovskii, E. A. Martusevich, E. A. Gayevoy, V. E. Gromov – Structural-phase state of the system “CdO-Ag coating / copper substrate” formed by electroexplosive method (pp. 299-302) |
PDF 350 KB |
|
|
| R. Servin, I. Calderon, A. Perez, F. Equihua, L. Falcon, M. Garcia, P. Orozco – Analysis of friction coefficient for a base steel 5 % Cr, applying variable loads of 196 N, 294 N and 392 N, and speeds of 0,18 m/sec, 0,36 m/sec and 0,54 m/sec (pp. 303-306) |
PDF 145 KB |
|
|
| A. Di Schino, M. Corradi – Quenching and tempering (Q&T) effect on a steel for forging with Cr and Mo addition (pp. 307-309) |
PDF 290 KB |
|
|
| Preliminary notes |
|
|
|
| M. K. Ibatov, A. Z. Issagulov, Sv. S. Kvon, V. Yu. Kulikov, A. M. Dostayeva, Ye. P. Chsherbakova – Studying vibration mode impact on forming steel structure in primary crystallization process (pp. 310-312) |
PDF 174 KB |
|
|
| Sv. S. Kvon, V. Yu. Kulikov, A. Z. Issagulov, A. M. Dostayeva, T. V. Коvalyova – Studying structure and properties of shaped ingots obtained in various conditions of crystallization (pp. 313-316) |
PDF 221 KB |
|
|
| Andoko, P. Puspitasari, F. Gapsari – Fatigue crack growth behavior of nodular cast iron subjected to two-step austempering (pp. 317-320) |
PDF 133 KB |
|
|
| A. Z. Issagulov, T. S. Makaev, M. K. Ibatov, Sv. S. Kvon, V. Yu. Kulikov, A. M. Dostayeva – Effect of reducing agent’s nature on the microstructure and certain properties of 30CrNi2Мo high-quality steel (pp. 321-323) |
PDF 132 KB |
|
|
| A. Pacana, K. Czerwińska, L. Bednarova – Discrepancies analysis of casts of diesel engine piston (pp. 324-326) |
PDF 175 KB |
|
|
| T. Šolić, D. Marić, M. Duspara, I. Samardžić – Analysis of plated layer’s effects on the structure resistance to corrosion (pp. 327-329) |
PDF 173 KB |
|
|
| V. Marušić, A. Milinović, I. Opačak, I. Putnik – Research into possibilities of reducing the X155CrVMo12-1 tool steel fragility (pp. 330-332) |
PDF 199 KB |
|
|
| F. Gapsari, Andoko, H. Wijaya – Corrosion behavior of brass in nitric acid (pp. 333-336) |
PDF 122 KB |
|
|
| A. Kozhevnikov, I. Kozhevnikova, N. Bolobanova, D. Shalaevskii – Methodology of design of the thin steel strip cold rolling energy efficient technology (pp. 337-340) |
PDF 210 KB |
|
|
| J. Barglik, A. Smalcerz, A. Smagor, G. Kopec – Experimental stand for investigation of induction hardening of steel elements (pp. 341-344) |
PDF 258 KB |
|
|
| A. K. Serikbayeva, F. A. Berdikulova, K. K. Mamyrbayeva, Sh. K. Akilbekova – Processing of rare metals containing waste of copper production (pp. 345-348) |
PDF 258 KB |
|
|
| A. Pacana, A. Gazda, N. Życzyński – Monitoring the process of anodising of VW70U pistons using the control chart (pp. 349-352) |
PDF 304 KB |
|
|
| Review papers |
|
|
|
| A. Panda, J. Dobransky, M. Jančik, I. Pandova, M. Kačalova – Advantages and effectiveness of the powder metallurgy in manufacturing technologies (pp. 353-356) |
PDF 327 KB |
|
|
| T. Brlić, S. Rešković, F. Vodopivec, I. Jandrlić – Lüders bands at the beginning of the plastic flow of materials (pp. 357-359) |
PDF 140 KB |
|
|
| N. A. Kazakova, A. L. Gendon, N. V. Sedova, E. A. Khlevnaya – Estimation of factors and projected growth of the metallurgical branch of Russia under unstable market conditions (pp. 360-362) |
PDF 88 KB |
|
|
| C. Kolmasiak, T. Wyleciał – Heat treatment of steel products as an example of transport phenomenon in porous media (pp. 363-366) |
PDF 419 KB |
|
|
| A. Kozhevnikov, N. Bolobanova, I. Kozhevnikova – Competency model for science and technology (S&T) personnel for the iron and steel industry (pp. 367-370) |
PDF 155 KB |
|
|
| Review |
|
|
|
| I. Mamuzić – Review of the Đuro Tadić monograph “Steelworks Sisak, company of steel and lifetime”, Sisak, 2017 (pp. 371-374) |
PDF 185 KB |
|
|
| Other |
|
|
|
| I. Mamuzić – Acknowledgement to reviewers, Metalurgija 57 (2018) 1-4, 1-376 (pp. 375-375) |
PDF 54 KB |
|
|
| I. Mamuzić – Election Assambly of Croatian Metallurgical Society (CMS) (pp. 376-376) |
PDF 109 KB |
